spot speed
英 [spɒt spiːd]
美 [spɑːt spiːd]
网络 点速度; 地点速度; 地点车速; 现点速率
双语例句
- If you are like me and want to produce working software quickly, then the faster you can spot issues that will affect delivery speed, the better, don't you think?
如果您和我一样，想快速地生产出能够工作的软件，那么越快发现影响交付速度的问题越好，难道您不这么认为吗？ - While normal speed traps try to catch speeding drivers at one single spot, average speed cameras punish drivers who cover the distance between point A and B too fast.
当规定一个正常速度来捕捉超速驾驶者在某一点的速度时，平均速度相机就会捕捉下来，惩罚从A到B点距离超速的司机。 - The influence of coating, spot size, power and scanning speed on hardening layer features and wear resistance were studied.
研完了表面状态、斑尺寸、率及扫描速度对硬化层特征及耐磨性的影响。 - Planting your feet in the right spot on the wall allows you to drive off the wall in a direct line toward the other end It gives you the greatest speed possible off the wall.
正确的转身落脚位置有助于你蹬离池壁时直接向对面池壁滑行，使你尽可能快地蹬离池壁。 - Wavelength Division Multiplexing ( WDM) technology has been a highlight spot in the high speed, large capacity optical communication system.
波分复用（WDM）技术已成为高速率、大容量光通信系统发展的主流方向。 - Approach: Spot the jump early, control speed three bumps early, the last two moguls before the air are key for setting up balance.
接近：提前定位起跳点，提前三个包控制速度，跳起前的最后两个包是设定平衡的关键。 - Effect of Spot Monitoring and Feedback on Control Ability of Approach Speed Perception of Freestyle Skiing Aerial Acrobats
现场监测与反馈对自由式滑雪空中技巧运动员助滑速度知觉控制能力的影响 - The experiments on spot show that this testing system can be operated easily and have the characteristics of high speed and high accuracy, which provides a new method for testing defects of artillery lumen.
现场测试表明，系统操作简单、速度快、精确度高，为火炮内膛的缺陷检测提供了一种新方法。 - The result shows that the temperature of inner surface increases with in-crease Of heating depth or electronic beam spot diameter, and decreases with increase of welding speed.
结果表明，加热深度或电子束斑点半径增加，内表面温度增加，焊接速度增加，内表面温度降低。 - With the help of theoretic analysis, the relationship between spot overlap and three parameters ( the pulse frequency, the scanning speed and the beam diameter of the Nd: YAG laser) is formulated.
为了简化工艺调整过程，提出了重叠率的概念，并进行了理论推导，建立了重叠率与脉冲频率、激光扫描速度、激光光斑直径相互关系的方程式。 - A model for the static laser spot indicates that the non linearity of the photochromic media is caused by the macroscopic reaction speed nonuniformity. Increasing the difference between the total reaction speed and the local reaction speed improves the masking effect.
根据光化学原理建立的静态光斑模型表明：介质的这种非线性特性是由局部反应宏观速率的不均匀性造成的，总宏观速率与局部宏观速率差异越大，掩膜效果越好。 - An analytical expression for spot moving speed on the former vibrating mirror of the polygonal mirror scanning system objective is derived from geometrical optical principle.
根据几何光学原理，推导出转镜-振镜扫描系统物镜前振镜上光斑移动速度的解析表达式。 - In the practical application, the quality of signal depends on communication distance, conditions on the spot, speed of transfer and the quality of cable.
在实际应用中，信号质量与现场环境、传输速度、电缆品质有很大关系。 - The infrared spot detection is the key technique used in optical measurement and detection instruments, such as infrared automation optometry, infrared range finder. The precision and speed of the detection algorithm affect those of the optical measurement system directly.
红外光斑中心检测在红外自动验光仪、红外测距仪等光学测量和检测仪器中是一项关键技术，检测算法的精度、速度直接影响光学测量的精度及速度。 - A method of matrix scanning with a high resolution flying spot tube is adopted in the scanner. It has the advantages of high speed and flexible control.
该扫描器采用高分辨率飞点管作阶梯波点阵扫描，具有速度快、控制灵活的优点； - This modified method uses exposure sound level ( LAE) measured on the spot as basic noise data for input, which can be typed into freight trains, trains at normal speed, trains at higher speed and special trains for passenger, etc.
改进后的比例法采用现场实测的暴露声级作为输入参数的噪声基本量，可以按货运列车、常速列车、提速列车、客运专线列车等分类。 - There introduces the features and functions of Chinese typing speed test system, presents the system module structure based on human-oriented design, gives a design way and a part of program codes, makes up a blind spot in the Chinese typing speed test fields.
主要介绍了中文录入测试系统的特点和功能，提出了基于人性化设计的系统模块结构，给出了这些模块的设计思路及部分程序代码，弥补了中文录入测试领域的一项空白。 - The diameter of interlaced yarn was measured and analyzed on the spot with photoelectric sensor and computer system. The influence of feeding rate, air pressure and yarn speed on the quality index was quantitatively described.
利用光电传感器系统和计算机系统，对网络丝直径进行现场检测与分析，定量地阐明了喂入率、空气压力和纺丝速度对各种评价指标的影响。 - Ye Qiaobo: Technical "Soft Spot" in Chinese Speed Skating
叶乔波：中国速度滑冰在技术方面存在软肋 - By means of the spot testing, this embedded speed controller can operate stably with high sensitivity.
通过现场测试，该速度控制器反应灵敏，运行稳定。 - This method not only can achieve the segmentation accuracy of pixel level, and better suppresses the effects of coherent spot noise, and the processing speed is better than that of MRF method.
该方法不但可以达到像素级的分割精度，而且较好的抑制了相干斑噪声的影响，而且处理速度优于MRF方法。 - It simplifies the control system by considering the process target as the plate temperature in specific spot of cooling aparatus, which avoids the complex resolve expression between the plate speed and spot temperature.
该方法首先把工艺目标转化为冷却装置选定位置上的钢板温度设定值，使控制系统输入输出关系得到简化，避免了板速和板点温度之间关系复杂难以解析表达的问题。 - With conditions that the laser power, spot diameter and overlap ratio remained unchanged, the thickness of the coating changed slightly with varying scanning speed, but the ratio of cracks increased and the hardness of the alloyed layer increased then decreased with the increase of scanning speed.
在激光功率、光斑直径、搭接率一定的条件下，合金化层厚度随扫描速度变化不大；裂纹率随扫描速度增加而增加；合金化层硬度随扫描速度的增加先增加后降低。 - Design light spot spacing, the displacement and the PC interface of real-time display of welding speed, according to the actual processing conditions, set up different welding conditions.
本文设计了光斑间距、位移量及焊接速率的上位机实时显示界面，可根据实际加工条件设置不同焊接环境。 - From the dynamic balance of problem has always been a research hot spot. People inorder to study the processing speed are faster, higher precision, more portable test system, to continuously improve the measurement system.
转子的动平衡问题一直以来都是机械领域研究的热点问题。人们为了获得处理速度更快、精度更高、更加方便携带的测试系统，对测量系统进行不断地改进。 - The results show that these parameters bring different effects. The number of passes ranks first, followed by laser spot in terms of their effect on the bending angle, with power of laser beam and scan speed being the last two factors.
结果表明：正交试验中研究的4个工艺参数产生的作用是不同的，按其变化对弯曲变形量影响的大小排序，它们依次是扫描次数、光斑直径、激光束功率、扫描速度。